NetPoint
NetPoint NPTR5 — 4.9–6.4 GHz

4.9–6.4 GHz

NetPoint NPTR5

An antenna built to operate in harsh marine environments and critical-impact industries.

Why NetPoint NPTR5?

NetPoint NPTR antennas are not only high-performance RF products — they are structural survival gear. The value proposition is a drastic cut in operating expense: by not replacing rusted hardware every 2–3 years, the investment pays for itself.

Built for operators who want to install and forget — avoiding recurring maintenance trips to replace corroded fittings or realign antennas shifted by wind. Strong, robust materials with mechanics designed for tower work and international telecom maintenance practices.

  • Commercial ports: CCTV and logistics on docks with constant sea breeze
  • Oil platforms: critical links between shore and offshore sites
  • Open-pit mines: corrosive dust and vibration from heavy machinery
  • Wind and solar parks: remote monitoring in extreme climates
  • Coastal surveillance: networks for navy or coast guard
  • Rural connectivity: isolated tropical or jungle communities with high humidity
  • Beach resorts: high-speed connectivity where equipment access is costly

Technical summary NetPoint NPTR5

  • 4.9–6.4 GHz

  • Fine alignment

  • RF shielding

  • Jumpers

  • Ready to install

  • Lightweight

  • Harsh environments

  • Dual polarization

  • Hot-dip

  • MLO Ready

Radios / compatibility: Cambium Networks, Mimosa Networks, Ubiquiti, Radwin, Telrad, LigoWave, Astra Wireless. Combos: Force 4600c, Radwin 2000D/E/Alpha, Mimosa C5C, RapidFire5, Force 300/400, PTP550, Rocket AC / AC GEN2, AirFiber 5XHD. Twinwaves: NPTW-RV, C5C, Mimosa C6X/B5X.

This product is made with 100% Mexican materials and developed by NetPoint’s R&D team in Mexico.

Extreme corrosion resistance

Mechanical benefits in detail

The best antenna shows in its mechanics: it eases tower work and follows international telecom maintenance practices. Hot-dip galvanized fittings and stainless fasteners so you are not replacing rusted gear every 2–3 years.

  • Hot-dip galvanizing + stainless fasteners
  • Install and forget — lower OPEX
  • Estimated 12-year service life in extreme sites
  • Seal connectors with vulcanizing tape
Exploded diagram of NPTR marine-grade antenna

Hover or tap a numbered hotspot to see details

NetPoint NPTR5 antennas

High gain for PtP links at 5/6 GHz

Harsh environments are not a problem — marine, mining, and critical industry

NPTR1

NPTR1

NPTR5-DP-2FT

Technical specifications NPTR1

  • PtP range30 km | 18 mi
  • CPE range15 km | 10 mi
  • Frequency4.9 - 6.4 GHz
  • Gain30 dBi
  • PolarizationV/H Dual Slant
  • VSWR≤ 1.6
  • F/B ratio> 36 dB
  • Beamwidth
  • ISO | XDP30 dB
  • Sizeø 60 cm - 2 ft
  • ConnectorN to N female
  • MountingIncluded
  • Wind load200 km/h | 125 mph
NPTR2

NPTR2

NPTR5-DP-3FT

Technical specifications NPTR2

  • PtP range50 km | 30 mi
  • Frequency4.9 - 6.4 GHz
  • Gain34 dBi
  • PolarizationV/H Dual Slant
  • VSWR≤ 1.6
  • F/B ratio> 50 dB
  • Beamwidth3.8°
  • ISO | XDP30 dB
  • Sizeø 90 cm - 3 ft
  • ConnectorN to N female
  • MountingIncluded
  • IncludesRadome · Arm
  • Wind load200 km/h | 125 mph
NPTR3

NPTR3

NPTR5-SDP-4FT

Technical specifications NPTR3

  • PtP range100 km | 62 mi
  • Frequency4.9 - 6.4 GHz
  • Gain37 dBi
  • PolarizationV/H Dual Slant
  • VSWR≤ 1.4
  • F/B ratio> 60 dB
  • Beamwidth
  • ISO | XDP30 dB
  • Sizeø 120 cm - 4 ft
  • ConnectorN to N female
  • MountingIncluded
  • IncludesRadome · Arm · Jumpers
  • Wind load200 km/h | 125 mph

Comparison

ModelSizeGainBeamwidthPtP range
NPTR1ø 60 cm / 2 ft30 dBi30 km
NPTR2ø 90 cm / 3 ft34 dBi3.8°50 km
NPTR3ø 120 cm / 4 ft37 dBi100 km

NetPoint is compatible with leading radio manufacturers

Cambium Networks · Mimosa Networks · Ubiquiti · Radwin · Telrad · LigoWave · Astra Wireless · Zyxel · Proxim Wireless

Cambium Networks
Mimosa Networks
Ubiquiti
Radwin
Telrad
LigoWave
Astra Wireless
Zyxel
Proxim Wireless

Ready to size your link?

Talk to the NetPoint team — pre-sales, RF planning, and authorized distributors.